MuralShield Matte Finish
Download
Technical Data Sheet-
Product Demo
-
Product Description
-
Product Instructions
MuralShield Matte in collaboration with the Social Public Art Resource Center (SPARC), California
How to Apply MuralShield & World's Best Graffiti Coating
MuralShield Matte is designed for the protection and conservation of fine art acrylic murals. It offers UV protection, consolidation, and weatherproofing.
Instructions: Shake MuralShield Matte thoroughly throughout the application process to properly mix the solution.
Key Features
- Restores weathered, uncoated murals.
- Recommended for preserving new acrylic and aerosol murals.
- Conservation-grade flexible coating, now in a Matte Finish!
- Protective and isolation layer (does not protect against graffiti alone).
For long-lasting graffiti protection, apply World's Best Graffiti Coating over MuralShield. This sacrificial barrier enables quick removal of graffiti without surface damage, maintaining the mural's vibrancy.
Compatibility: Suitable for artist-grade acrylic paints, fine art aerosols, and collage or digitally printed murals on various substrates including uncoated concrete, wood, signage grade panels, exterior insulated finishing systems (EIFS), stuccos, CMU block walls, and painted/coated surfaces.
Features:
- Long-Lasting Preservation: Provides durable UV protection, weatherproofing, and is compatible with various mural substrates, enhancing the longevity of new artworks.
- Superior Mural Restoration & Protection: Revives color and flexibility in sun-damaged murals and strengthens weakened paint binders.
- Paintable Surface: Can be painted over indefinitely with an additional coat of MuralShield applied to newly painted sections.
- Preparation for Painting: MuralShield can also be used to prepare concrete, CMU, stucco, and both painted and unpainted walls for painting. Apply two coats before gessoing or priming.
Greetings from El Paso The Greetings Tour Project (Victor Ving)
The Pierside Mural Shepherd Fairey (OBEY Giant)
The Great Wall of Los Angeles Judy Baca
Passengers Fintan McGee
Begin by testing MURALSHIELD on an inconspicuous section of the mural. You should see a noticeable increase in color vibrancy and luster. Allow to dry.
Method of Application
Apply by airless spray gun, Gravity Feed or Siphon HVLP spray guns, or Acetone-rated pump-up Sprayer.
Step 1: Allow a newly painted artwork to thoroughly cure before applying MURALSHIELD.
Step 2: Apply a first coat, lightly misted (fog coat), to ensure initial wall adhesion.
Step 3: Apply two to three generous coats of MURALSHIELD, allowing at least 10 minutes of drying time between coats. Make sure to overlap your passes to ensure a thorough coating.
Step 4: Allow final coat to dry thoroughly for at least 20 minutes before applying WORLD’S BEST GRAFFITI COATING (WBGC). Apply at least two coats of WBGC (or more if the artwork is highly susceptible to vandalism) using a clean HVLP sprayer, tight knit roller, or brush. Use a bristle brush to remove any beading.
Coverage Guidelines
Approximately 300 sq ft of coverage per gallon on painted or unpainted surfaces, depending on substrate and application technique, for 2-3 coats of product.
For example, an 800 sq ft mural will require 2-3 gallons of MuralShield.
Application
Surface Preparation
Ensure the surface is clean, dry, and free of contaminants. Apply MuralShield Matte in two coats, allowing adequate drying time between coats.
Graffiti Protection
For comprehensive graffiti resistance, apply World's Best Graffiti Coating over the cured MuralShield Matte. This combination creates a sacrificial barrier that allows for easy removal of graffiti without damaging the underlying mural.
For a comprehensive guide, please view "How To Protect & Preserve Murals".
Coverage Guidelines
Approximately 300 sq. ft. of coverage per gallon on painted or unpainted surfaces, depending on the substrate and application technique, for 2-3 coats of the product. (For example, an 800 sq. ft. mural will require 2-3 gallons of MuralShield Matte).
Exact coverage varies depending on the type of stain and the porosity of the surface material.