World's Best Graffiti Coating
World's Best Graffiti Coating
Item No.
WB0072
WB0070
WB0071
Size
1 Quart
1 Gallon
5 Gallon
Download Technical Data Sheet-
Product Demo
-
Product Description
-
Product Instructions
World’s Best Graffiti Coating (WBGC) is a water based all-weather, long-term SACRIFICIAL protection, formulated for most types of surfaces. Provides durable protection against spray paint, marker/felt tip pens, pollution and grime. Also provides protection against salt and sea type moisture.
Correctly applied, life expectancy against graffiti is generally 7 years but it can be effective up to 10 years. This protective coating is permeable and allows the surface to breath. Prevents graffiti from penetrating into the substrate. The surface must be re-protected following graffiti removal which can be done immediately to a damp (not wet) surface. WBGC is readily biodegradable according to OECD test 302 B.
Features & Benefits
- Safe, quick and easy to apply by sprayer.
- Fast drying time.
- Makes getting graffiti off walls a pleasure.
- Virtually invisible / matte finish.
- Non toxic and virtually odorless.
- Ideal for heritage buildings.
- Can be used on porous and non porous substrates.
Preparation
Clean off both graffiti and other contamination, such as road grime, grease, wax, oil and paint residue etc. from substrate.
Exterior Protection
Shake or stir product well prior to use. WBGC can be applied with any low-pressure sprayer or airless sprayer. Two coats are usually applied. NOTE: Allow some intermediate drying between coats.
WBGC
can be applied to a damp, not wet surface. Runs and/or
excessive application can easily be washed off with
water, following completion of work.
Interior Protection
Some painted substrates can be protected using a low-pressure sprayer. The protection is applied three times.
Application
Use the product as provided. Do not dilute. Walls can be dampened during hot weather to assist application. This product information is intended as a guide for use of this product. Urban Restoration Group US Inc. cannot give any guarantee for end result achieved. The applicator of the product shall carry out testing and be responsible for the result.
Drying Period
The protected surface will be water and graffiti-resistant after 2 hours and dry after 4 hours. Ultimate protection will be achieved after 72 hours.
Coverage Guidelines
Varies dependent upon the porosity of surface material:
- Concrete, brick or similar: 500 sq ft per gal per coat. 80 sq ft on sandstone, limestone and other soft absorbent surfaces (per 3 flood coat application).
- Sandstone, plaster or other soft absorbent surfaces: 360 sq ft per gal per coat.
- Painted surfaces, 640 sq ft per gal per coat.